WC

WC
WC

WC

XST
KBZ

  • Application 
    The lifting station is suitable for pumping of wastewater off places in
    private dwellings and basements where wastewater cannot be led
    directly to the sewer by means of a natural downward slope.
    It is typically used for:
    Renovation of offices or other commercial buildings.
    Wall-mounted toilets in basements below sewer level.
    Washing machines & dish washers.
    Toilets, wash basins, bathtubs and cabinet showers in the
    bathrooms where the location may be remote from the main soil
    pipe so that a natural slope cannot be established.
  • Features
    Compact and slim for easy installation
    Automatic start and stop
    Top quality air switch and carbon filter from Germany
    Circuit board with time delay function and low voltage protection
    Low noise
    New blade and support with better cutting performance
    Suitable for sewage water containing toilet paper and
    faeces with cutting blade
  • Operating Conditions
    Max.liquid temperature：50°C
    Max. ambient temperature:35°
    CPH value: 4-10
    The pump must not be used for strong chemicals or solvents
Categories: , ,
  • Description
  • Technical Data
  • Materials Table
  • Package Information
  • Ambient & Liquid Temperature

Description

Show Details
Download

MODEl POWER (P1) Q(m3/h) 0 2.1 3.9 5.1 6.3 6.9 7.5
Single Phase W Q(l/min) 0 35 65 85 105 115 125
WC600A 600 H(m) 9.2 8.5 7.5 6.5 5.5 4.5 3.5
No Part Material
1 outlet EPDM
2 Connector PP
3 3-Way PP
4 Cover PP
5 Outlet cover ABS
6 Motor cover ABS
7 Air switch
8 Capacitor
9 Tank cover ABS
10 Pump body PP
11 Cutting ring AISI 304
12 Circuit boad
13 Upper cover ZL 102
14 Rotor
15 Stator
16 Bearing seat ZL 102
17 Stator shield ZG304
18 Impeller PPO
19 Cutting blade AISI 304
20 Stirrer PPO
21 Water tank ABS
22 Outlet NBR
23 Feed pipe EPDM
MODEl GW
(Kgs)		 L
(mm)		 W
(mm)		 H
(mm)		 Quantity
(PCS/20'TEU)
WC600A 9.6 495 215 374 720

Max.liquid temperature：50°C
Max. ambient temperature:35°

Related Products

  •
    Read more
    Quick View

    HD/HDS/HDC Series Diffusion Mixed Flow Pump
    0 out of 5

    General

    The type HD、HDS、HDQ、HDC pumps are based on independent research and development technology which are especially suitable for varying level and high head applications. They are used for sending water at normal temperature or liquid which is similar to water in physical, chemical properties, generally not more than 50°C. For special liquid, please contact us to get solution for that.

    Application field
    Municipal engineering, hospital, farmland irrigation and drainage, water conservancy project, industrial water supply system, building, hotel, dock.

     

    Scope of performance

    ◆  Capacity: 900-27000 m3/h
    ◆  Head: 5-20 m
    ◆  Discharge diameter: 350-above 1400 mm

    Read more
    Quick View
  •
    Read more
    Quick View

    XKP
    0 out of 5
    • Application
      It is used for water circulation in small and medium-sized swimming pools.
      Slightly dirty water with solids in suspension can be perfectly filtered.
    • Pump
      Engineering plastic pump body
      AISI 304 shaft
      Max. liquid temperature: +35°C
      Max. suction: 3.5m
    • Motor
      Motor with copper or aluminum winding
      Built-in thermal protector for single phase motor
      Insulation class: F
      Protection class: IPX5
    Read more
    Quick View
  •
    Read more
    Quick View

    HLB (K)/HD Series Vertical Mixed Flow Pump
    0 out of 5

    General

    vertical mixed flow pumps are energy-saving product with high efficiency, developed and designed by LEO according to national principles of energy saving and emission reduction to meet market demands. The series of products adopt advantages of both domestic and overseas similar products, and combine many years manufacturing experience of LEO, which keep products improving.

    Application

    The series of product are suited to deliver clear water, rainwater, seawater and sewage, which application to power plant as circulating water pump, iron & steel plant and quay, water supply and drainage in city and irrigation project.

    Performance range

    ◆  Capacity：0.5~20 m3/s
    ◆  Head：5~50 m
    ◆  Temperature：≤55℃
    ◆  Speed：245~1480 r/min

    Read more
    Quick View
  •
    Read more
    Quick View

    GLN Series Vertical Multistage Long Shaft Pump
    0 out of 5

    General

    GLN series high efficiency vertical multistage long shaft pump keeps high efficiency, good cavitations performance, rational structure, long operation life and easy and convenience maintenance and installation.

    Application

    The products are widely applied to condenser of 50-1000 MW generation set for delivering condensate water, and also applicable to water supply and drainage project which demands high suction performance, high efficiency and high head.

    Performance range

    ◆  Capacity：120~2200 m3/h
    ◆  Head：36~360 m
    ◆  Temperature：≤80℃，Special requirements can be achieved for up to 120℃
    ◆  Speed：1480 r/min
    ◆  Suction diameter：250~900 mm

    Read more
    Quick View
  •
    Read more
    Quick View

    XKF
    0 out of 5
    • Application
      Filter of the pond water.
      Beautiful ornament for the pond.
      Oxygen enrichment of the pond water
    • Features
      Plastic casing.
      Small, lightweight, durable and reliable.
      Various nozzles available for displaying of cascade, water bell , etc.
    Read more
    Quick View
  •
    Read more
    Quick View

    EVS
    0 out of 5
    • Application
      Suitable for transferring liquids of low viscosity，non-inflammable and
      non-explosive,not containing solid particles or fibers.
      Water supply%drainage for high-rise buildings,filtration and transfer
      at waterworks,pressure boosting in main pipe.
      Washing and cleaning systems,boiler feeding,cooling water
      circulation,water treatment systems,auxiliary system,support equipemt.
      Ultra-filtration systems，reverse-osmosis systems.
    • Pump
      AISI304 Impeller，diffuser，barrel
      Stainless steel welded shaft
      Liquid temperature range：+ 4℃~+ 60℃
      Cast iron water inlet and outlet with special anti-rust treatment
      Liquid PH value：6.5-8.5
      Max.operation pressure：15 bar
      Altitude：up to 1000 m
      C&U bearing
    • Motor
      Motor with copper winding
      Insulation class: F
      Protection class：IP55
      Max.ambient temperature：40°C
    Read more
    Quick View
  •
    Read more
    Quick View

    LST
    0 out of 5
    • Application
      For water supply from wells or reservoirs
      For domestic use,for civil and industrial applications
      For garden use and irrigation
    • Operating condition
      Max solid content：0.3%
      Max chlorine content: 400mg/L
      PH value: 6.5 ~ 8.0
      Min well diameter: 4″
    • Motor and Pump
      NEMA dimension standards
      AISI 304 Adapter
      AISI 304 dischage head
      AISI 304 pump casiing
      AISI 304 non-return value
    Read more
    Quick View
  •
    Read more
    Quick View

    LVS/LVR
    0 out of 5
    • Application
      Suitable for transferring liquids of low viscosity, non-
      inflammable and non-explosive, not containing solid
      particles or fibers.
      Water supply&drainage for high-rise buildings,
      filtration and transfer at waterworks, pressure boosting
      in main pipe.
      Washing and cleaning systems, boiler feeding, cooling
      water circulation, water treatment systems, auxiliary
      system, support equipment.
      Ultra-filtration systems，reverse-osmosis systems，distillation
      systems, separators, swimming pools.
      Agricultural irrigation: sprinkler irrigation, drip-feed irrigation.
      Food&beverage industry.
      Fire-fighting system.
    • Operating Conditions
      Low viscosity, non-inflammable and non-explosive liquids
      not containing solid particles or fibers. The liquids must not
      chemically attack the pump materials. When pumping liquids
      with a density or viscosity is higher than that of water, a motor
      with a higher output power rating shall be used.
      Liquid temperature：-20℃〜+ 120℃
      Flow ranges: 0.7-240 m3/h
      Liquid pH value：4-10
      Max.ambient temperature：+ 40℃
      Max. operation pressure: 33 bar
      Altitude: up to 1000 m
    • Motor
      IE 2 motor (IE 3 motor optional)
      Totally enclosed&fan-cooled
      Protection class：IP55
      Standard voltage ：50Hz 1×220V / 3×380V
    • Ambient Temperature
      Max.ambient temperature：+ 40℃.Ambient temperature
      above 40℃or installation at altitude of more than 1000 meters
      above sea level require the use of an oversize motor. Because
      of low air density and poor cooling effects, the motor output
      power P2 will be decreased. See the picture.
      In such cases, it may be necessary to use a motor with a higher
      output power rating.
    Read more
    Quick View