Control Box
- PID Control Box
The key control part of the water supply system. The inverter,
circuit breaker, relay, contactor, alarm device, signal indicator
and remote monitoring device are integrated with reasonable
layout inside the control box.
Control Box
Related Products
-
Read moreQuick ViewAPm
• Application
-Can be used to transfer clean water or other liquids similar to water
in physical and chemical properties
-Suitable for small living water supply, automatic water sprinkler system,
small air conditioner system or supporting equipment etc.
• Pump
-Special anti-rust treatment for cast iron pump body and support
-Anti-block system for impeller
-Brass impeller AISI 304 shaft
-Max. liquid temperature: +40c
-Max. suction: +8m
• Motor
-C&U bearing
-Motor with copper winding
-Built-in thermal protector for single phase motor
-Insulation class: F
-Protection class: IPX4
-Max. ambient temperature: +40C
-IE 2 motor (Three phase, power≥ 0.75kW, AP220 excluded)Read moreQuick View -
Read moreQuick ViewACm
- Application
Can be used to transfer clean water or other liquids similar to water in
physical and chemical properties.
Suitable for industrial use andurban water supply, pressure boosting
for high buildings and fire fighting, garden irrigation, long-distance
water transfer, heating ventilation and air controlling, circulation and
pressure boosting for cold and hot water, and supporting equipment etc. - Pump
Cast iron pump body and support under special anti-rust treatment.
AISI 304 shaft.
Max. liquid temperature: +40oC.
Max. suction: +8 m. - Motor
C&U bearing.
Motor with copper winding.
Built-in thermal protector for single phase motor.
Insulation class: F.
Protection class: IPX4.
Max. ambient temperature: +40oC.
IE 2 motor (Three phase, power ≥ 0.75kw).
Read moreQuick View - Application
-
Read moreQuick ViewPB SERIES
- Easy Maintenance and Repairing
All function keys are on one surface - Stronger Frame
Welded only with two frame tubes，less weld more durability - Easier Battery Maintenance
Battery is stationed in the upper part of frame,no need to crouch to reach battery
Read moreQuick View - Easy Maintenance and Repairing
-
Read moreQuick ViewAJm
- Application
Can be used to transfer clean water or other liquids similar to water
in physical and chemical properties.
Suitable for lifting water from the well, sprinkling irrigation in garden,
pressure boosting of running water, and supporting equipment etc. - Pump
Cast iron pump body and support under special anti-rust treatment.
Stainless steel impeller.
AISI 304 shaft.
Max. liquid temperature: +40 C.
Max. suction: +9 m - Motor
C&U bearing.
Motor with copper winding.
Built-in thermal protector for single phase motor.
Insulation class: F.
Protection class: IPX4.
Max. ambient temperature: +40C.
Read moreQuick View - Application
-
Read moreQuick View2ACm
- Application
Can be used to transfer clean water or other liquids similar to water in
physical and chemical properties.
Suitable for industrial use andurban water supply, pressure boosting
for high buildings and fire fighting, garden irrigation, long-distance
water transfer, heating ventilation and air controlling, circulation and
pressure boosting for cold and hot water, and supporting equipment etc. - Pump
Cast iron pump body and support under special anti-rust treatment.
AISI 304 shaft.
Max. liquid temperature: +40oC.
Max. suction: +8 m. - Motor
C&U bearing.
Motor with copper winding.
Built-in thermal protector for single phase motor.
Insulation class: F.
Protection class: IPX4.
Max. ambient temperature: +40oC.
IE 2 motor (Three phase, power ≥ 0.75kw).
Read moreQuick View - Application
-
Read moreQuick ViewLVS/LVR
- Application
Suitable for transferring liquids of low viscosity, non-
inflammable and non-explosive, not containing solid
particles or fibers.
Water supply&drainage for high-rise buildings,
filtration and transfer at waterworks, pressure boosting
in main pipe.
Washing and cleaning systems, boiler feeding, cooling
water circulation, water treatment systems, auxiliary
system, support equipment.
Ultra-filtration systems，reverse-osmosis systems，distillation
systems, separators, swimming pools.
Agricultural irrigation: sprinkler irrigation, drip-feed irrigation.
Food&beverage industry.
Fire-fighting system. - Operating Conditions
Low viscosity, non-inflammable and non-explosive liquids
not containing solid particles or fibers. The liquids must not
chemically attack the pump materials. When pumping liquids
with a density or viscosity is higher than that of water, a motor
with a higher output power rating shall be used.
Liquid temperature：-20℃〜+ 120℃
Flow ranges: 0.7-240 m3/h
Liquid pH value：4-10
Max.ambient temperature：+ 40℃
Max. operation pressure: 33 bar
Altitude: up to 1000 m - Motor
IE 2 motor (IE 3 motor optional)
Totally enclosed&fan-cooled
Protection class：IP55
Standard voltage ：50Hz 1×220V / 3×380V - Ambient Temperature
Max.ambient temperature：+ 40℃.Ambient temperature
above 40℃or installation at altitude of more than 1000 meters
above sea level require the use of an oversize motor. Because
of low air density and poor cooling effects, the motor output
power P2 will be decreased. See the picture.
In such cases, it may be necessary to use a motor with a higher
output power rating.
Read moreQuick View - Application
-
Read moreQuick ViewEVP
- Application
Water supply: Pressure boosting for main pipes and high-rise buildings
Industrial pressure boosting：Water system，cleaning system，high pressure
washing system and firefighting system
Pressure boosting for pressure tank, sprinkling irrigation and trichling irrigation
ir conditioner, cooling system and industrial cleaning - Features
Economic vertical multistage pumps
Applicable for a wide scope of different temperatures，flow rates and pressure ranges
Water inlet and outlet can be rotated for proper assembly in accordance with
installation requirement
Easy installation and maintenance
Advanced hydraulic model design，featuring stable operation and high efficiency
Cast iron water inlet and outlet with special anti-rust treatment
High-strength engineering plastic flow passage components
Reliable stainless steel welded shaft - Working Conditions
Liquid temperature：+ 5℃~60℃
Maximum ambient temperature：+ 40℃
Maximum pressure: 15 bar
Altitude：up to 1000 m
Read moreQuick View - Application
-
Read moreQuick ViewEDH
- Application
It is applicable to household water supply, equipment support,
pipeline pressurization, garden watering, vegetable greenhouse
watering, fish farming and poultry raising, industrial and mining,
wate supply and drainage of enterprises and high-rise buildings, central air
conditioner and centralized heating circulation system, etc. - Pump
AISI 304 shaft Max.liquid temperature: +85°C
Altitude: up to 1000 m
Max. suction: 8 m
Max. inlet pressure: limited by max. operating pressure
Max.operation pressure: 10 bar
Liquid PH value: 4-10 - Motor
Motor with copper winding
Built-in thermal protector for single phase motor
Insulation class: F
Protection class: IP55
Max. ambient temperature: +40°C
Read moreQuick View - Application
-
Read moreQuick View
APm
• Application
-Can be used to transfer clean water or other liquids similar to water
in physical and chemical properties
-Suitable for small living water supply, automatic water sprinkler system,
small air conditioner system or supporting equipment etc.
• Pump
-Special anti-rust treatment for cast iron pump body and support
-Anti-block system for impeller
-Brass impeller AISI 304 shaft
-Max. liquid temperature: +40c
-Max. suction: +8m
• Motor
-C&U bearing
-Motor with copper winding
-Built-in thermal protector for single phase motor
-Insulation class: F
-Protection class: IPX4
-Max. ambient temperature: +40C
-IE 2 motor (Three phase, power≥ 0.75kW, AP220 excluded)Read moreQuick View -
Read moreQuick View
ACm
- Application
Can be used to transfer clean water or other liquids similar to water in
physical and chemical properties.
Suitable for industrial use andurban water supply, pressure boosting
for high buildings and fire fighting, garden irrigation, long-distance
water transfer, heating ventilation and air controlling, circulation and
pressure boosting for cold and hot water, and supporting equipment etc. - Pump
Cast iron pump body and support under special anti-rust treatment.
AISI 304 shaft.
Max. liquid temperature: +40oC.
Max. suction: +8 m. - Motor
C&U bearing.
Motor with copper winding.
Built-in thermal protector for single phase motor.
Insulation class: F.
Protection class: IPX4.
Max. ambient temperature: +40oC.
IE 2 motor (Three phase, power ≥ 0.75kw).
Read moreQuick View - Application
-
Read moreQuick View
PB SERIES
- Easy Maintenance and Repairing
All function keys are on one surface - Stronger Frame
Welded only with two frame tubes，less weld more durability - Easier Battery Maintenance
Battery is stationed in the upper part of frame,no need to crouch to reach battery
Read moreQuick View - Easy Maintenance and Repairing
-
Read moreQuick View
AJm
- Application
Can be used to transfer clean water or other liquids similar to water
in physical and chemical properties.
Suitable for lifting water from the well, sprinkling irrigation in garden,
pressure boosting of running water, and supporting equipment etc. - Pump
Cast iron pump body and support under special anti-rust treatment.
Stainless steel impeller.
AISI 304 shaft.
Max. liquid temperature: +40 C.
Max. suction: +9 m - Motor
C&U bearing.
Motor with copper winding.
Built-in thermal protector for single phase motor.
Insulation class: F.
Protection class: IPX4.
Max. ambient temperature: +40C.
Read moreQuick View - Application
-
Read moreQuick View
2ACm
- Application
Can be used to transfer clean water or other liquids similar to water in
physical and chemical properties.
Suitable for industrial use andurban water supply, pressure boosting
for high buildings and fire fighting, garden irrigation, long-distance
water transfer, heating ventilation and air controlling, circulation and
pressure boosting for cold and hot water, and supporting equipment etc. - Pump
Cast iron pump body and support under special anti-rust treatment.
AISI 304 shaft.
Max. liquid temperature: +40oC.
Max. suction: +8 m. - Motor
C&U bearing.
Motor with copper winding.
Built-in thermal protector for single phase motor.
Insulation class: F.
Protection class: IPX4.
Max. ambient temperature: +40oC.
IE 2 motor (Three phase, power ≥ 0.75kw).
Read moreQuick View - Application
-
Read moreQuick View
LVS/LVR
- Application
Suitable for transferring liquids of low viscosity, non-
inflammable and non-explosive, not containing solid
particles or fibers.
Water supply&drainage for high-rise buildings,
filtration and transfer at waterworks, pressure boosting
in main pipe.
Washing and cleaning systems, boiler feeding, cooling
water circulation, water treatment systems, auxiliary
system, support equipment.
Ultra-filtration systems，reverse-osmosis systems，distillation
systems, separators, swimming pools.
Agricultural irrigation: sprinkler irrigation, drip-feed irrigation.
Food&beverage industry.
Fire-fighting system. - Operating Conditions
Low viscosity, non-inflammable and non-explosive liquids
not containing solid particles or fibers. The liquids must not
chemically attack the pump materials. When pumping liquids
with a density or viscosity is higher than that of water, a motor
with a higher output power rating shall be used.
Liquid temperature：-20℃〜+ 120℃
Flow ranges: 0.7-240 m3/h
Liquid pH value：4-10
Max.ambient temperature：+ 40℃
Max. operation pressure: 33 bar
Altitude: up to 1000 m - Motor
IE 2 motor (IE 3 motor optional)
Totally enclosed&fan-cooled
Protection class：IP55
Standard voltage ：50Hz 1×220V / 3×380V - Ambient Temperature
Max.ambient temperature：+ 40℃.Ambient temperature
above 40℃or installation at altitude of more than 1000 meters
above sea level require the use of an oversize motor. Because
of low air density and poor cooling effects, the motor output
power P2 will be decreased. See the picture.
In such cases, it may be necessary to use a motor with a higher
output power rating.
Read moreQuick View - Application
-
Read moreQuick View
EVP
- Application
Water supply: Pressure boosting for main pipes and high-rise buildings
Industrial pressure boosting：Water system，cleaning system，high pressure
washing system and firefighting system
Pressure boosting for pressure tank, sprinkling irrigation and trichling irrigation
ir conditioner, cooling system and industrial cleaning - Features
Economic vertical multistage pumps
Applicable for a wide scope of different temperatures，flow rates and pressure ranges
Water inlet and outlet can be rotated for proper assembly in accordance with
installation requirement
Easy installation and maintenance
Advanced hydraulic model design，featuring stable operation and high efficiency
Cast iron water inlet and outlet with special anti-rust treatment
High-strength engineering plastic flow passage components
Reliable stainless steel welded shaft - Working Conditions
Liquid temperature：+ 5℃~60℃
Maximum ambient temperature：+ 40℃
Maximum pressure: 15 bar
Altitude：up to 1000 m
Read moreQuick View - Application
-
Read moreQuick View
EDH
- Application
It is applicable to household water supply, equipment support,
pipeline pressurization, garden watering, vegetable greenhouse
watering, fish farming and poultry raising, industrial and mining,
wate supply and drainage of enterprises and high-rise buildings, central air
conditioner and centralized heating circulation system, etc. - Pump
AISI 304 shaft Max.liquid temperature: +85°C
Altitude: up to 1000 m
Max. suction: 8 m
Max. inlet pressure: limited by max. operating pressure
Max.operation pressure: 10 bar
Liquid PH value: 4-10 - Motor
Motor with copper winding
Built-in thermal protector for single phase motor
Insulation class: F
Protection class: IP55
Max. ambient temperature: +40°C
Read moreQuick View - Application
-
Read moreQuick View
APm
• Application
-Can be used to transfer clean water or other liquids similar to water
in physical and chemical properties
-Suitable for small living water supply, automatic water sprinkler system,
small air conditioner system or supporting equipment etc.
• Pump
-Special anti-rust treatment for cast iron pump body and support
-Anti-block system for impeller
-Brass impeller AISI 304 shaft
-Max. liquid temperature: +40c
-Max. suction: +8m
• Motor
-C&U bearing
-Motor with copper winding
-Built-in thermal protector for single phase motor
-Insulation class: F
-Protection class: IPX4
-Max. ambient temperature: +40C
-IE 2 motor (Three phase, power≥ 0.75kW, AP220 excluded)Read moreQuick View -
Read moreQuick View
ACm
- Application
Can be used to transfer clean water or other liquids similar to water in
physical and chemical properties.
Suitable for industrial use andurban water supply, pressure boosting
for high buildings and fire fighting, garden irrigation, long-distance
water transfer, heating ventilation and air controlling, circulation and
pressure boosting for cold and hot water, and supporting equipment etc. - Pump
Cast iron pump body and support under special anti-rust treatment.
AISI 304 shaft.
Max. liquid temperature: +40oC.
Max. suction: +8 m. - Motor
C&U bearing.
Motor with copper winding.
Built-in thermal protector for single phase motor.
Insulation class: F.
Protection class: IPX4.
Max. ambient temperature: +40oC.
IE 2 motor (Three phase, power ≥ 0.75kw).
Read moreQuick View - Application
-
Read moreQuick View
PB SERIES
- Easy Maintenance and Repairing
All function keys are on one surface - Stronger Frame
Welded only with two frame tubes，less weld more durability - Easier Battery Maintenance
Battery is stationed in the upper part of frame,no need to crouch to reach battery
Read moreQuick View - Easy Maintenance and Repairing
-
Read moreQuick View
AJm
- Application
Can be used to transfer clean water or other liquids similar to water
in physical and chemical properties.
Suitable for lifting water from the well, sprinkling irrigation in garden,
pressure boosting of running water, and supporting equipment etc. - Pump
Cast iron pump body and support under special anti-rust treatment.
Stainless steel impeller.
AISI 304 shaft.
Max. liquid temperature: +40 C.
Max. suction: +9 m - Motor
C&U bearing.
Motor with copper winding.
Built-in thermal protector for single phase motor.
Insulation class: F.
Protection class: IPX4.
Max. ambient temperature: +40C.
Read moreQuick View - Application