AKSm

AKSm-01
AKSm-01

AKSm

ECH
KB SERIES

  • Application
    Can be used to transfer clean water or other liquids similar to water
    in physical and chemical properties.
    Suitable for small living water supply, automatic water sprinkler system,
    small air conditioner system or supporting equipment eto.
  • Pump
    Self-priming Peripheral Pump
    Brass impeller
    Brass pump bonnet
    AISI 304 shaft
    3 second time delay of pump start after plugging into the socket to
    avoid potential danger caused by electric sparks
    Automatic pressure sensor inside
    Automatic switching to small flow control system in condition of smal water flow
    Automatic stop in 6 minutes in case of no water inside
    Max.liquid temperature：+ 40℃
    Max，suction：+8 m
    Liquid pH value：6.5-8.5
  • Motor
    C&U bearing
    Copper winding
    Built-in thermal protector
    Low voltage operation with power design of 180V-220V/50 Hz
Categories: , ,
  • Description
  • Technical Data

Description

Show Details
Download

Model Power Q(m3/h) 0 0.3 0.6 0.9 1.2 1.5 1.8 2.1
Kw Hp Q(m3h) 0 5 10 15 20 25 30 35
AKSm155A 0.155 0.2 H(m) 32 30 26 22 17 12 7 2

Related Products

  •
    Read more
    Quick View

    LPP
    0 out of 5
    • Application
      HVAC: Circulation of hot water, boiler mix-flow, temperature mix-flow,
      intermittent heat supply, etc.
      Air conditioning system: Cooling water circulation.
      Water supply system: Filtration and transfer at waterworks;
      Pressure boosting in main pipe.
      Industrial applications: Washing& cleaning systems, boiler feeding,
      cooling water circulation, water treatment systems, and auxiliary
      systems.
      Fire-fighting system.
    • Pump
      Flow: up to 760 m3/h
      Head: up to 85 m
      Power range: 0.37 -132 kW
      Liquid temperature:0°C-+90°C
      Max ambient temperature：+ 40°C
      Max operation pressure: 16 bar
      Altitude: up to 1000 m
    • Motor
      Closed construction
      Insulation class：F
      Protection class: IP 55
      IE 2 motor as standard.IE 3 motor is available on request
    • Flange
      EN 1092 and DIN 2576 standard
    • Ambient Temperature
      Max. Ambient temperature:+40°C.Ambient temperature above40°C,or
      installation at altitude of more than 1000 m above sea level, require the
      use of an oversize motor. Because of low air density and poor cooling
      effects, the motor output power P2 will be decreased. See the picture.
      For example, when the pump is installed at altitude of more than 3500 m
      above sea level，P2 will be decrease to 88%.when the ambient
      temperature is 70°C，P2 will be decreased to 78%.
    Read more
    Quick View
  •
    Read more
    Quick View

    LST
    0 out of 5
    • Application
      For water supply from wells or reservoirs
      For domestic use,for civil and industrial applications
      For garden use and irrigation
    • Operating condition
      Max solid content：0.3%
      Max chlorine content: 400mg/L
      PH value: 6.5 ~ 8.0
      Min well diameter: 4″
    • Motor and Pump
      NEMA dimension standards
      AISI 304 Adapter
      AISI 304 dischage head
      AISI 304 pump casiing
      AISI 304 non-return value
    Read more
    Quick View
  •
    Read more
    Quick View

    XR
    0 out of 5
    • Application
      For water supply from wells or reservoirs
      For domestic use,for civil and industrial applications
      For garden use and irrigation
    • Operating condition
      Maximum fluid temperature up to + 350C
      Maximum sand content：0.25%
      Maximum immersion: 80m
      Minimum well diameter: 3″
    • Motor and Pump
      Rewindable motor or full obturated screen motor
      Three-phase: 380V-415V/50Hz
      Single-phase: 220V-240V/50Hz
      Pumps are designed by casing stressed
      Curve tolerance according to ISO 9906
    Read more
    Quick View
  •
    Read more
    Quick View

    LGP
    0 out of 5
    • Application
      To transfer clean water with liquid temperature between
      0°C and 40°C
      Applicable in water supply and drainage for factories，
      mines, municipal facilities as well as field irrigation, etc.
    • Features
      New unique design with ergonomic feature
      Portable and compact pump frame
      High quality motor with excellent performance and long
      service life
      Impeller designed with high efficient hydraulic system
      Low fuel consumption
    • Pump
      Anti-rust cast iron impeller and diffuser
      Max.suction：8 m / 120 s
      Inlet/outlet: 25 mm/38 mm
    • Engine
      Single cylinder，2-stroke，Air-cooled
      Max。power：1.6 HP
      Displacement: 42.7 cc
      Rated speed: 7500 rpm
    Read more
    Quick View
  •
    Read more
    Quick View

    HD/HDS/HDC Series Diffusion Mixed Flow Pump
    0 out of 5

    General

    The type HD、HDS、HDQ、HDC pumps are based on independent research and development technology which are especially suitable for varying level and high head applications. They are used for sending water at normal temperature or liquid which is similar to water in physical, chemical properties, generally not more than 50°C. For special liquid, please contact us to get solution for that.

    Application field
    Municipal engineering, hospital, farmland irrigation and drainage, water conservancy project, industrial water supply system, building, hotel, dock.

     

    Scope of performance

    ◆  Capacity: 900-27000 m3/h
    ◆  Head: 5-20 m
    ◆  Discharge diameter: 350-above 1400 mm

    Read more
    Quick View
  •
    Read more
    Quick View

    LDP
    0 out of 5
    • Application
      To transfer clean water with liquid temperature between 0℃and 40℃
      Application in water supply and drainage for factories, mines,
      municipal facilities as well as field irrigation, ect.
    • Feature
      All new design with ergonomic feature
      High lift series with LEO high efficient hydraulic system
      Reliable 4-stroke gasoline engine with low fuel consumption
      and high quality crankshaft
      Portable，durable and compact pump frame
      Durable sealing system with special mechanical seal
      Optional outlet selection
    • Pump
      Anti-rust cast iron impeller and diffuser
      Max.suction：5 m
      Inlet/outlet: 2″3″
    • Engine
      Single cylinder,4-stroke,Air-cooled
      Max.power：3.8 HP / 5.4 HP
      Displacement: 219 cc/306 cc
      Rated speed: 3600 rpm
    Read more
    Quick View
  •
    Read more
    Quick View

    GS Series High Efficiency Single Stage Double Suction Centrifugal Pump
    0 out of 5

    General

    Type GS single stage double suction centrifugal pump have high efficiency and energy saving character. With wide Performance range, superior hydraulic performance and reasonable structure, the series of pumps have high efficiency and reliability, low cavitations and cost for maintenance.

    Application

    GS series products are mainly used for deliver fresh water or other liquids similar to fresh water, the solid content is not more than 80mg/L, it also can deliver sewage, sea water and muddy water with little particle with adopting of anti-corrosion and anti-friction material. The products are widely applicable to supply & drainage system or cooling & circulating system for iron & steel, petrochemical, thermo power plant and mines industries, etc. and running water system for cities, circulating water for heating system, irrigation projects and various water conservation projects, fire systems, shipbuilding industry as well.

    Performance range

    ◆  Capacity：135~38000 m3/h
    ◆  Head：12~205 m
    ◆  Temperature：≤80℃，cooling structure will be adopted for bearing, the material of casing & cover is QT500-7≤150℃
    ◆  Speed：370~2970 r/min
    ◆  Suction diameter：150~1800 mm

    Read more
    Quick View
  •
    Read more
    Quick View

    LEN
    0 out of 5
    • Application
      Water supply systems
      Pressure boosting
      Heating systems for commercial buildings and district heating
      Cooling plants for industrial processing and air-conditioning units
      General transport for industrial processes
      Fire fighting system
    • Pump
      Liquid PH value:4-10
      Liquid temperature:0°C-90°C
      Max head: 36.5m
      Max operation pressure: 16 bar
      Altitude: up to 1000 m
    • Motor
      Insulation class：F
      Protection class: IP 55
      IE 2 motor as standard.IE 3 motor is available on request
    • Flange
      EN 1092 and DIN 2576 standard
    • Ambient Temperature
      Max. Ambient temperature:+40°C.Ambient temperature above40°C,or
      installation at altitude of more than 1000 m above sea level, require the
      use of an oversize motor. Because of low air density and poor cooling
      effects, the motor output power P2 will be decreased. See the picture.
      For example, when the pump is installed at altitude of more than 3500 m
      above sea level，P2 will be decrease to 88%.when the ambient
      temperature is 70°C，P2 will be decreased to 78%.
    Read more
    Quick View