AJDm
- Application
Can be used to transfer clean water or other liquids similar to water
in physical and chemical properties.
Suitable for lifting water from the well, sprinkling irrigation in garden,
pressure boosting of running water, and supporting equipment etc. - Pump
Cast iron pump body and support under special anti-rust treatment.
Stainless steel impeller.
AISI 304 shaft.
Max. liquid temperature: +400C.
Max. suction: +9 m - Motor
C&U bearing.
Motor with copper winding.
Built-in thermal protector for single phase motor.
Insulation class: F.
Protection class: IPX4.
Max. ambient temperature: +40oC.
- Description
- Technical Data
- Dimensions
- Materials Table
- Package Information
- Ambient & Liquid Temperature
Description
Show Details
Download
| MODEl | POWER | HS(m) | Q(m3/h) | 0 | 2 | 4 | 6 | 8 | 10 | 12 | 14 | 16 | 18 | 20 | 22 | 24 | 26 | 28 | 30 | 32 | 34 | |
| kW | HP | |||||||||||||||||||||
| AJDm-55/4H | 0.55 | 0.75 | 15 | H(m) | 39 | 35 | 33 | 29 | 27 | 25 | 23 | 21 | 19 | 17 | 15 | 14 | 13 | - | - | - | - | - |
| Model | DNp | DN1 | DN2 | DN3 | DN4 | DIMENSIONS(mm) | ||||||||||
| L | L1 | n | n1 | H | H1 | a1 | a2 | a2 | S | |||||||
| AJDm-55/4H | 4" | 1¼" | 1" | 1" | 1" | 370 | 77 | 190 | 150 | 212 | 100 | 160 | 53 | 17 | 10 | |
| No. | Part | Material |
| 1 | Pump body | HT200 |
| 2 | Nozzle | PPO |
| 3 | Impeller | Stainless Stell |
| 4 | Mechanical seal | Carbon/Ceramic |
| 5 | O-ring | NBR |
| 6 | Support cover | AISI 304/HT200 |
| 7 | Support | ZL 102 |
| 8 | Bearing | |
| 9 | Rotor | |
| 10 | Ventuei tube | PPO |
| 11 | Nozzle | PPO |
| 12 | Ejector | HT200 |
| 13 | Terminal box | ABS |
| 14 | Terminal board | PC |
| 15 | Stator | |
| 16 | Motor foot | |
| 17 | Capacitor | |
| 18 | Cable holder | |
| 19 | Rear Cover | ZL 102 |
| 20 | Fan | PP |
| 21 | Fan cover | PP |
| Model | GW(Kgs | L(mm) | W(mm) | H(mm) | Quantity(PCS/20'TEU) |
| AJDm-55/4H | 16.65 | 500 | 215 | 240 | 1053 |
Max. Ambient temperature: +40°C
Max. Liquid temperature: +40°C
