-
XST
- Application
It is applicable to household water supply, equipment support,
pipeline pressurization, garden watering, vegetable greenhouse
watering, fish farming and poultry raising, industrial and mining,
wate supply and drainage of enterprises and high-rise buildings, central air
conditioner system, etc.
- Pump
AISI 304 shaft
Max. liquid temperature: +40oC
Altitude: up to 1000 m
Max. suction: 8 m
Max. inlet pressure: limited by max. operating pressure
Max.operation pressure: 8 bar
Liquid PH value: 6.5-8.5
- Motor
Motor with copper winding
Built-in thermal protector for single phase motor
Insulation class: F
Protection class: IP55
Max. ambient temperature: +40oC
- Construction Features
Single-impeller centrifugal pump featuring axial intake
and radial discharge.
Inlet and outlet DN in compliance
with EN 733 (ex DIN 24255) and UNI 7467.
Flanges in compliance with UNI 2236 and DIN 2532
Rear entry (impeller, motor can be extracted without
disconnecting the pump body from the pipes)
-
LRP
- Application
It is widely used for heating ventilating and air conditioning
(HVAC) circulation, pressure boosting of hot water in family,
homes powered by solar energy, industrial auxiliary equipment
cold and hot water circulation and so forth.
Water circulation for the central and district heating system
Domestic hot water circulation.
- Pump
Bronze or anti-rust cast iron pump body
Noryl impeller with heat resistance up to 150oC
99 % alumina ceramic shaft
Liquid temperature: 2oC – 110oC
- Motor
Insulation class: H
Protection class: IP44
99% alumina ceramic bearing
Copper winding
Three speed motor
-
LRP
- Application
It is widely used for
Pressure boosting for domestic water supply.
Floor heating system.
Solar pumping system.
- Pump
Automatic pressure boosting.
Anti-rust cast iron pump body.
Noryl impeller with heat resistance up to 150oC.
99% alumina ceramic shaft.
Liquid temperature: 2oC-60oC.
- Motor
Insulation class: H.
Protection class: IP42.
99% alumina ceramic bearing.
Copper winding.
-
LPm
- Application
It is suitable for boosting hot water powered by solar energy
for sauna and bathing and solves insufficient water pressure in
high-rise buildings.
It can also supply water (less than 100oC) to two families.
- Pump
Cast iron pump body and support under special anti-rust treatment
AISI 304 shaft
Liquid temperature: 2°C 100°C
- Motor
Insulation class: F
Protection class: IP44
-
LP
- Application
Hot water circulation and heating system
Air-conditioning system
Industrial circulation system
General pressure boosting in household
- Pump
Cast iron pump body and support under special anti-rust treatment
AISI 304 shaft
Liquid temperature: 2°C 100°C
- Motor
Insulation class: B
Protection class: IP44
-
LBm
- Application
Multi-Applicaton:
Transfer water, wine, vinegar, juice and other non-aggressive liquids
without sand or othersolid impurities.
Bidirectional rotation:
Motor equiped with a reverse switch to allow the pump rotate in two
directions. Suction side can be used for delivery, delivery side can be used
for suction.
Pump liquids out and refill without moving pipes.
- Pump
Max. Liquid temperature: 35°C
Max. ambient temperature: 40°C
Max. Suction: 8m
Equiped with reverse switch for bidirectional rotation
AISI 304 Pump body & cover, brass impeller
AISI304 welding shaft
- Motor
Built-in thermal protector
Insulation class: F
Protection class: IP 44
220-240V/50Hz, n-2850
S1 continuous duty